Replace Pull Rope Starter on Garden Tiller

replace-pull-rope-starter-on-garden-tiller

replace-pull-rope-starter-on-garden-tiller

 

Garden tiller rope suffers hard during soil tilling process thus becomes damaged with time. To keep on soil tilling process of garden, you must know some guidelines to replace the pull rope starter on garden tiller.

 

 

 

 

 

Tools required:

  • Wrench set
  • Pull cord
  • Wide vice grip pliers
  • Socket set
  • Needle-nose pliers
  • Matches

How to replace the pull rope starter

  • Remove the covering of top of sparkplug
  • Then take out sparkplug wire
  • Use socket set or the wrench set to remove joint series of bolts from plastic shroud over starter
  • Keep this plastic shroud upside down on a surface. Here it has old pull cord
  • Now remove the pull cord through wide vice grip pliers
  • Tie a knot in the cord at middle of pulley
  • Using needle-nose pliers loosen the knot till broken garden tiller cord is removed
  • Now slide the cord into knot hole in pulley
  • Pull at least 10 inches cord tightly through knot hole and tie other knot at the end
  • Grab the cord from outside and pull it again
  • The cord will finally set itself on garden tiller
  • Remove the pliers and replace shroud to let the garden tiller work

Once you have followed these simple guidelines to replace pull rope starter on garden tiller, you will easily do it yourself in future.

Related posts

How to Change Careers Without Going Broke

Alex Jane

Business Horoscope June 05 to June 11

Alex Jane

The Blue Lagoon Iceland

Alexis N. Crockett